|
Page 1 | Particle Compressor
The Particle Compressor is used to compress the outputs of a maximum of 4 Particle Filters into a denser usable form. The output of the Particle Compressor is so dense that it resembles a liquid when outputted. The Particle Compressor is built in a 3x3x3 formation.SpecificationsManufacturing Time: | 5 seconds | Power Required: | 512 per second | Power Capacity: | 4096 | Max. Power Recharge Rate: | 10000 per second | Gas Storage: | 750 | Compressed Gas Storage: | 5 | Gas Required: | 232 per compressed |
|
|
|
Page 1 | Lift Compressor
Attach to the base of a piston lift to improve the rate at which gas is regenerated, maintaining the performance of heavily-used lifts. This compressor must be externally powered. A compressors are required on a lift to achieve the maximum height of 256m. Please note that due to technical limitations, Multiplayer Lifts are limited to 64m; a 'waterfall' of lifts is the best solution here.SpecificationsGas Recovery: | 0.15 l/s | Power Usage: | 1 /s | Power Capacity: | 150 | Power Transfer Rate: | 5 /s |
Please note : The 64m limitation for multiplayer is a technical one, not for reasons of gameplay, and it is recommended you use Teleporters or Advanced Teleporters for long-distance movement in network games |
|
|
Page 1 | Lift Compressor
Attach to the base of a piston lift to improve the rate at which gas is regenerated, maintaining the performance of heavily-used lifts. This compressor must be externally powered. A compressors are required on a lift to achieve the maximum height of 256m. Please note that due to technical limitations, Multiplayer Lifts are limited to 64m; a 'waterfall' of lifts is the best solution here.SpecificationsGas Recovery: | 0.15 l/s | Power Usage: | 1 /s | Power Capacity: | 150 | Power Transfer Rate: | 5 /s |
Please note : The 64m limitation for multiplayer is a technical one, not for reasons of gameplay, and it is recommended you use Teleporters or Advanced Teleporters for long-distance movement in network games |
|
|
Page 1 | Particle Compressor
The Particle Compressor is used to compress the outputs of a maximum of 4 Particle Filters into a denser usable form. The output of the Particle Compressor is so dense that it resembles a liquid when outputted. The Particle Compressor is built in a 3x3x3 formation.SpecificationsManufacturing Time: | 5 seconds | Power Required: | 512 per second | Power Capacity: | 4096 | Max. Power Recharge Rate: | 10000 per second | Gas Storage: | 750 | Compressed Gas Storage: | 5 | Gas Required: | 232 per compressed |
|
|